Fisher & Paykel PROFESSIONAL EB30PSX1 User Manual page 50

DISPLAYED MESSAGE
Ground too fine.
Adjust mill 1 click
while in operation
GENERAL ALARM:
REFER TO
USER MANUAL
!
50
ALERTS
POSSIBLE CAUSE
The grinding is
too fine and the
coffee is delivered
too slowly or
not at all.
If you're using a
water softener filter ,
an air bubble may
have been released
inside the circuit,
obstructing delivery.
The inside of
the appliance is
very dirty.
The appliance
needs descaling and/
or the filter must
be replaced.
The tubes inside
the milk container
must be cleaned.
The filter must
be replaced.
The machine must
be descaled.
The auto-start
function is enabled.
Energy saving
is enabled.
WHAT TO DO
Repeat coffee delivery and turn the
grinding adjustment dial one click
clockwise towards
7
mill is in operation. If after making at
least two coffees, delivery is still too
slow, repeat the correction procedure,
turning the grinding adjustment dial
another click until delivery is correct (see
section 'Adjusting the coffee mill'). If the
problem persists, make sure the water
tank is fully inserted.
Deliver some water through the
hot water spout until the flow
becomes regular.
Clean the inside of the appliance
thoroughly, as described in section
'Care and cleaning'. If the message is
still displayed after cleaning, contact
Customer Care.
The descaling procedure described
in the 'Descaling' section, needs to
be performed and/or the filter needs
replacing or removing as described
in section 'Water filter'.
Turn the froth adjustment dial to
Replace the filter or remove it as
described in section 'Water filter'.
The descaling procedure described
in section 'Descaling' needs to
be performed.
To disable the function, refer to the
instructions under 'Auto start'.
To disable energy saving, refer to
instructions under 'Settings'.
NOT NEEDED
while the coffee
CLEAN
.