Fisher & Paykel PROFESSIONAL EB30PSX1 User Manual page 46

When the water in the tank has run out, empty out the container before running the second
rinse cycle.
1
2
3
If the descaling cycle is not completed correctly, eg due to a power cut, we recommend
z
repeating the cycle.
If the water tank has not been filled to the
z
ensure the descaling solution has been completely flushed from the machine's internal
circuits. Before starting the rinse cycle, remember to empty the drip tray.
After descaling, it is normal for the grounds container to contain water.
z
If you live in an area with very hard water, the descaling alert may appear at very short
z
intervals. This is part of normal operation.
46
DESCALING
Remove and rinse the water tank.
Replace the water filter (if using) and fill
the tank up to
Press
NEXT
Place the 85 fl oz (2.5L) container back
under the coffee and water spouts.
Press
OK
The coffee maker will begin rinsing again.
At the end of rinsing, empty the grounds
container and drip tray then replace.
Descaling is now complete and the coffee
maker is ready to use again.
level, you may need to do a third rinse to
MAX
level.
MAX
.
to start.