Fisher & Paykel PROFESSIONAL EB30PSX1 User Manual page 48

5
6
7
Replacing the filter
REPLACE WATER FILTER
filter, then follow the instructions above to install a new one.
We recommend replacing the filter every two months or if the appliance has not been used
for three weeks, even if
to the
WATER FILTER
on the screen.
Removing the filter
To remove the filter, go to the
Follow the instructions on the screen to remove.
48
WATER FILTER
will apear on the screen when a new filter is needed. Remove the old
REPLACE WATER FILTER
setting and select
WATER FILTER
Remove the water tank and fill with
fresh water. Place the filter in the
tank, immersing completely for about
ten seconds.
Allow any air bubbles to escape, then
press
NEXT
Insert the filter into the filter housing,
pushing in as far as it will go.
Replace the tank lid, then place the tank
back in the appliance.
Press
NEXT
Place a 85 fl oz (2.5L) container under the
coffee and water spouts.
Press
OK
The coffee maker will begin rinsing. Once
rinsing is complete, the coffee maker is
ready to use.
hasn't appeared on the screen. To do this, go
REPLACE WATER FILTER,
setting and select
.
.
to start.
then follow the instructions
REMOVE WATER FILTER
.