Alerts - Fisher & Paykel PROFESSIONAL EB30PSX1 User Manual

DISPLAYED MESSAGE
Fill tank with
fresh water
Insert water tank
Empty grounds
container
Insert grounds container
Add pre-ground coffee,
coffee max. 1 Measure
Add coffee, coffee max.
1 Measure
Fill beans container
Select a milder taste
or reduce pre-ground
coffee quantity

ALERTS

POSSIBLE CAUSE
Insufficient water
in the tank.
The tank is not
correctly in place.
The grounds
container is full.
After cleaning, the
grounds container
has not been
re-inserted.
The 'pre-ground
coffee' function
has been selected
without placing any
pre-ground coffee
in the funnel.
The pre-ground
coffee funnel
is clogged.
A long coffee
with pre-ground
coffee has been
requested.
The coffee beans
have run out.
Too much coffee has
been used.
WHAT TO DO
Fill the tank with water and ensure that
it is inserted correctly, pushing it as far
as it will go until it clicks into place.
Insert the tank correctly and press as far
as it will go.
Empty the grounds container and drip
tray, clean and place it back in the
appliance. Note: when removing the
drip tray, the grounds container must be
emptied, even if it contains few grounds.
If this is not done, when you make the
next drinks, the grounds container may
fill up more than expected and clog
the machine.
Remove the drip tray and insert
the grounds container.
Place pre-ground coffee in the
funnel and repeat delivery.
Empty the funnel. See section 'Cleaning
the pre-ground coffee funnel'.
Place pre-ground coffee in the
funnel and press
OK
and complete delivery.
Fill the beans container.
Select a milder strength by
pressing
STRENGTH
quantity of pre-ground coffee
(maximum one measure).
to continue
or reduce the
49