Table of Contents
Advertisement
User Manual
Hot Plate
When turning the device off at a temperature over 40°C, the ACTUAL temperature and OFF
flash alternately in the digital display.
6. CLEANING AND MAINTENANCE
6.1 Safety instructions for cleaning
•
Before cleaning and before repairing, disconnect the device from the outlet (pull the plug!)
and allow it cool.
•
Do not use caustic cleaning agents and make sure that no water seeps into the device.
•
To protect yourself from electric shock, do not immerse the device, cable or socket in water
or other liquids.
ATTENTION!
The device is not suited for direct washing with a water jet. Therefore, do not use a pressure
water jet to clean the device!
6.2 Cleaning
Clean the device regularly with a neutral cleaning agent!
•
Before cleaning the device, switch it off with the
cal outlet (pull the plug!).
•
Leave the device to cool.
•
Afterwards clean the surface with a damp cloth.
•
Do not use abrasives that could scratch the surface of the Hot Plates.
•
Never scrape the painted surface of the Hot Plate with a knife, fork, metal scrapers or other
sharp objects, nor use abrasives, steel wool or similar.
•
Do not clean the joint between the frame and Hot Plate with sharp objects.
•
After cleaning, use a soft cloth to dry and polish the surface.
6.3 Safety instructions for maintenance
•
Check the main cable for damage from time to time. Do not use the device if the cable is
damaged. If the cable is damaged, it must be replaced by customer service or a qualified elec-
trician to avoid risks.
button and disconnect from the electri-
- 14 -
Advertisement
Table of Contents
