Page 1
User Manual Hot Well USER MANUAL Hot Well Installation Variants: plug in On Counter Variants Hot Well GN1 Hot Well – A GN1 Hot Well GN2 Hot Well GN3 Hot Well GN4 Version: 12/2020 - 1 -...
User Manual Hot Well Keep the manual handy with the device! GENERAL ......................4 NFORMATION ABOUT THE USER MANUAL ................. 4 ....................4 IABILITY AND WARRANTY OPYRIGHT ........................4 ECLARATION OF ONFORMITY ..................5 2. SAFETY .................. 5 2.1 G ........................
Page 3
User Manual Hot Well 7. POSSIBLE MALFUNCTIONS ..........15 8. DISPOSAL ................16 9. CONFORMANCE DECLARATION ........17 - 3 -...
User Manual Hot Well 1. GENERAL 1.1 Information about the user manual This user manual describes the installation, operation and maintenance of the device and serves as an important source of information and reference. The knowledge of all safety and handling instructions contained in the user manual creates the conditions for the safe and proper operation of this device.
User Manual Hot Well 1.4 Declaration of Conformity The device corresponds to the latest standards and EU directives. We certify this in the EC Declaration of Conformity. The Declaration of Conformity can be downloaded online from our homepage. 2. SAFETY This section provides an overview of all-important safety aspects.
User Manual Hot Well ATTENTION! • This device is not intended for use by individuals (including children) with reduced physical, sensory, or mental capabilities. It may also not be used by individuals who lack experience and/or knowledge unless they are supervised by a person responsible for their safety or have received instructions on how to use the device from any such authorized person.
User Manual Hot Well 3. TRANSPORT, PACKAGING AND STORAGE 3.1 Transport inspection The delivery must be checked immediately upon receipt for completeness and transport damage. In case of visible transport damage, do not accept the delivery, or only do so conditionally. Mark the extent of the damage on the transport documents / delivery note.
User Manual Hot Well 4. TECHNICAL DATA 4.1 Technical specifications Description: Hot Well Variants: Installations Variants: plug-in or On Counter Variants (A) Sizes: Material: Well: Stainless Steel 1.4031 Temperature Range: +20 °C to +140 °C, continuously adjustable Heating Capacity [Watt]: 1500 2700 3000...
User Manual Hot Well 4.2 Product Diagram 4.2.1 Installation Variant – plug-in (diagram size GN1) Connection plug for controller Drain Electronics Power cord 230V AC 4.2.2 On Counter – (diagram size GN1) - 9 -...
User Manual Hot Well 4.3 Scope of Supply Varies between plug-in and on counter. Variant Plug-in On Counter • • Connection cable with Schuko plug 1,6 m • • * Controller with cable length 1,2 m • • User manual •...
User Manual Hot Well 5. INSTALLATION AND OPERATION 5.1 Safety information WARNING! Risk of electrocution! The device must be installed by qualified professionals. • Device may cause injuries due to improper installation! • Before installation, check the data of the local power grid with the technical specifications of the unit (see nameplate).
User Manual Hot Well 5.2 Installation and Electric Connection 5.2.1 Installation (only valid for installation variants) • Put your device on a level and safe surface which stands the weight of the device. • Prepare the cut-out of the table according to our installation drawings and check the cut-out.
User Manual Hot Well • Do not use pots or pans with a bottom which has ridged edges or is unevenly enameled. This can cause permanent scratches. 5.3.1 Control panel The Hot Well can be set and operated via the touch control panel mounted on the front. The four buttons are used for adjusting settings, quick choice between preset values, as well as parameterization.
User Manual Hot Well 6. CLEANING AND MAINTENANCE 6.1 Safety instructions for cleaning • Before cleaning and before repairing, disconnect the device from the outlet (pull the plug!) and allow it cool. • Do not use caustic cleaning agents and make sure that no water seeps into the device. •...
User Manual Hot Well 6.4 Maintenance MAINTENANCE FREE 7. POSSIBLE MALFUNCTIONS Problem Cause Remedy • • Power plug not plugged in Pull out the plug and properly insert it correctly • • Fuse of the power supply has Check fuse, test unit on a No function tripped.
Page 16
User Manual Hot Well 8. DISPOSAL Old equipment Your old device must be disposed of at the end of its service life in accordance with local regula- tions. It is advisable to contact a specialized waste management company, or to contact the local disposal service in your community.
Page 17
User Manual Hot Well 9. CONFORMANCE DECLARATION - 17 -...
Need help?
Do you have a question about the Hot Well GN1 and is the answer not in the manual?
Questions and answers