Table of Contents
Advertisement
User Manual
Hot Plate
5.3 Operation
•
Clean the device prior to use as described in chapter 6.2 "Cleaning".
•
Press the
button to switch on the device.
•
Do not place food directly on the surface. All foods should always be placed in appropriate
containers on the surface of the Hot Plate. Use only suitable tableware. Do not use plastic ta-
bleware.
•
Do not use pots or pans with a bottom which has ridged edges or is unevenly enameled. This
can cause permanent scratches.
5.3.1 Control panel
The Hot Plate can be set and operated via the touch control panel mounted on the front.
The four buttons are used for adjusting settings, quick choice between preset values, as well
as parameterization. Only press the buttons using a finger or a Touchpen.
ON/OFF button
Button
Button
Display heating operation
Digital display
ATTENTION!
A change in the preset parameters should only be carried out by customer service.
With this button the device is turned on or off. When turning it
on, the last selected mode starts.
These buttons are for adjusting the temperature.
By pressing the
shown in the display. To change the temperature press
either
or
, to adjust the temperature accordingly.
The device is in heating mode.
Shows the actual and by pressing the
temperature.
- 13 -
button, the adjusted temperature will be
and
button the target
Advertisement
Table of Contents
