Table of Contents
Advertisement
User Manual
Hot Plate
5. INSTALLATION AND OPERATION
5.1 Safety information
WARNING! Risk of electrocution!
The device must be installed by qualified professionals.
•
Device may cause injuries due to improper installation!
•
Before installation, check the data of the local power grid with the technical specifications of
the unit (see nameplate).
•
Connect the device only if they match! Follow the safety instructions!
•
The device may only be operated when connected to a properly installed single socket with
protective contact. Don't use any multiply sockets. A safety switch is mandatory when in-
stalling a unit.
•
The connection must have a safety switch.
•
Do not pull the plug from the socket by the cable.
•
The power cord must not come into contact with hot parts.
WARNING! Hot surface!
During operation, some parts of the device become very hot. To avoid burns, do not touch hot
parts!
•
Do not use this device if it is not working properly, is damaged or has been dropped.
•
Do not use any accessories and spare parts which are not recommended by the manufactur-
er. These could pose a hazard to the user or cause damage to the device and cause personal
injury, and also void the warranty.
•
Do not lay the cable over carpets or other heat insulation. Do not cover the cable. Keep the
cable away from work areas and do not immerse it in water.
•
Do not move the device during operation and do not tip it over.
•
Never heat food or liquids in sealed containers or bottles. This builds up a pressure which can
cause the container or bottle to explode.
•
The Hot Plate must not be used as a storage area. Accidental activation or residual heat can
cause objects left there to melt or burn.
•
Make sure that the cable does not come into contact with heat sources or sharp edges. Do
not hang the cable off the table or counter.
- 11 -
Advertisement
Table of Contents
