Advertisement
3. Once the display shows the programme you would like to use, press
to start. The display will show the approximate time remaining and the stage of the wash.
To pause and restart a wash programme
1. Press
to pause the programme. The programme status (eg 'Wash') will flash while the dishwasher is paused.
2. Open the door very slowly.
There is a risk of being sprayed with hot water. Do not fully open the door until the spray
arms have stopped rotating.
3. Load, remove, or rearrange any dishes if needed.
4. Press
to restart the programme. If the dishwasher is not restarted within 7 minutes, it will then beep every few
seconds
Changing the wash programme
The dishwasher will remember the last programme used.
Wash Programme
Auto
https://producthelp.fisherpaykel.com/Manuals/Dishwasher_Manuals/User_Guides/590719B_Dishwasher/08_CK_models_Con...
The dishwasher will remember the last programme used.
Description
Senses the optimal wash programme for your dishes
Updated: Wed, 17 Nov 2021 18:45:24 GMT
Powered by
2
Advertisement
