InFocus LP130 User Manual page 36

M a i n t e
30
n a n c e &
7 Install the new lamp module.
8 Tighten the screw on the outside of the module.
9 Press the yellow tab to reconnect the lamp module.
10 Replace the lamp access grill by lining up the ribs on the grill
with the marks on the bottom case and sliding the grill in the
direction of the arrows on the bottom case.
11 Plug in the power cord and press the Power switch to turn the
projector back on.
12 To reset the lamp hour counter in the Status menu, press and
hold the
still holding down the
Verify that the counter was reset by pressing the
button and viewing the counter in the Status menu. See
page 25 for details on the Status menu.
T r o u b l
button, then press the
reset
button) for 10 seconds.
reset
e s h o o t
button (while
menu/select
menu/select
i n g