Using The Keypad And Remote Buttons - InFocus LP130 User Manual

U s i n g t
NOTE: If you have turned Auto
Source off (page 22), you may
need to press the source button
more than once to display an
active source. The sources switch
in this order: data analog, data
digital, S-video, and composite
14
h e P r o

Using the Keypad and Remote Buttons

While the menus are displayed, the
the keypad and the up and down arrow buttons on the remote
act as menu navigation and adjustment buttons and the
menu/select
Screen Menus" on page 16 for details.
F 11
IGURE
Keypad and remote buttons
Menu/select
Press the
menu/select
(The menus automatically close after 30 seconds if no buttons are
pressed.) When you close the menus, the projector saves any
changes you made. For more information about the on-screen
menus, see page 16.
Source (keypad only)
When you have more than one source (computer and video) con-
nected to the projector, select between them by pressing the
video.
button on the keypad or the
source
remote.
j e c t o r
button acts as a select button. See "Using the On-
LED
menu/select
source
reset
button to open the on-screen menus. Press
menu/select
again (while Exit is highlighted) to close the menus.
or Data and Video (remote only)
and buttons on
source reset
menu/select
forward
data
backward
keystone video
or button on the
data video