InFocus LP130 User Manual page 24

U s i n g t
NOTE: The color setting applies
to video sources only. The tint
setting applies to NTSC video
sources only.
18
h e P r o
Contrast
The contrast controls the degree of difference between the lightest
and darkest parts of the picture. Adjusting the contrast changes
the amount of black and white in the image.
1 Use the up and down arrows to highlight Contrast, press
menu/select
menu/select
Tint
The tint adjusts the red-green color balance in the projected
image.
1 Use the up and down arrows to highlight Tint, press
menu/select
menu/select
Color
The color setting adjusts a video image from black and white to
fully saturated color.
1 Use the up and down arrows to highlight Color, press
menu/select
menu/select
Blank screen
Blank Screen determines what color is displayed when there is no
active source and when the projector is in standby.
1 Use the up and down arrows to highlight Blank screen, press
menu/select
black, and white, then press
tion.
j e c t o r
, use the arrows to adjust the contrast, then press
to accept your changes.
, use the arrows to adjust the tint, then press
to accept your changes.
, use the arrows to adjust the color, then press
to accept your changes.
, use the arrows to cycle through the options blue,
to accept your selec-
menu/select