U
s
i
n
g
t
NOTE: To order the LP 1000
Series Ceiling Mount, refer to
"Optional Accessories" on
page 47.
34
h
e
P
r
o
Language
You can display the on-screen menus in English, French, German,
and Spanish. The default is English.
Click the button for the language you want. The menus redraw
•
immediately.
Ceiling
Click either mouse button to turn the image upside down for
•
ceiling-mounted projection.
Rear Projection
When you select
so you can project from behind a translucent screen.
Default Source
Default Source toggles between all five sources. This determines
which source the projector checks first during power-up for
active video. Click the button to toggle between the options.
Auto Source Select
This setting toggles between On and Off. When this feature is Off,
the projector defaults to the source selected in Default Source. To
display another source, you must manually select one by press-
ing the
computer
ton on the keypad. When this feature is On, the projector
automatically finds the active source, checking the default source
first. Click the button to toggle between the options.
Display Messages
This setting toggles between On and Off. When this feature is On,
status messages such as "No signal detected" and "Standby"
appear in the lower-right corner of the screen. Click the button to
turn this feature off and not see status messages.
Display Startup Screen
This setting toggles between On and Off. When this feature is On,
the In Focus startup screen appears when the projector starts up
and remains until an active source is detected. The startup screen
contains information on contacting In Focus. Click the button to
turn this feature off and display a plain black or blue screen
instead of the startup screen.
j
e
c
t
o
r
Rear Projection
or
buttons on the remote or the
video
, the projector reverses the image
but-
source