Controls Menu Functions - InFocus LP1000 Reference Manual

Controls Menu Functions

Video Standard
When is on, the projector attempts to pick the video stan-
Auto
dard (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N or SECAM) auto-
matically based on the input signal it receives. (The video
standard options may vary depending on your region of the
world.) The input signals for SECAM, PAL-M, and PAL-N video
cannot be automatically detected, therefore they must be chosen
manually. If the projector is unable to detect the standard, the col-
ors might not look right or the image might appear "torn." If this
happens, manually select a video standard by clicking the button
and cycling through the standards.
Standby TIme
This option lets you select how long the lamp stays on and the
blank screen is displayed when you enter standby mode before
the projector turns off. Select among 1, 5, 10, and 15 minutes by
clicking the button and cycling through the options.
F 25
IGURE
Controls menu
NOTE: If you already know the
video standard used in your geo-
graphical area, it's often best to
manually select it.
NOTE: Standby Time is applica-
ble only when using RS-232 con-
trol or a remote that has a standby
button.
33