InFocus LP1000 Reference Manual page 26

Computer 1, 2 and 3
When you have more than one source (computer or video) con-
nected to the projector, select between them by pressing the but-
ton for the source you want.
Press
computer 1, 2,
Show Pro presentation.
Freeze
The button halts, or "freezes" the projected image. Use this
freeze
button to freeze a frame of video (the video continues to run but
the projected image is frozen). You can also freeze an image from
a computer source on the screen, allowing you to perform other
operations on the computer without the audience seeing them.
Press again when you want the image to return to normal.
freeze
Help
This displays the help screen.
Light
Press to illuminate the buttons on the remote control. The
light
light goes off automatically 10 seconds after you press any
button.
Menu
Press to open the on-screen menus. Press
menu
close the menus. When you close the menus, the projector saves
any changes you made. For more information about the on-
screen menus, see page 25.
Mute
Pressing the button silences the internal speakers. It also
mute
silences any external speakers that are connected.
To return the volume to its previous setting, press
press either
volume
or to display your computer image or Lite-
3
button.
again to
menu
again or
mute
NOTE: It takes a few seconds for
the projector to recognize a new
source. After the first time, the
source is recognized immediately.
23