Table of Contents
Advertisement
Shortcut Key Guide
Activate the Signal Input Selection menu.Use and
Activeate the Line of Sight feature. Further press to cycle between the colors or turn off.
Activeate the ECO Mode feature.Further press to cycle through the presets.
INITIAL SETUP
Connect the monitor to a power outlet.
1. Press the POW ER button on the monitor or to turn it on (The indicator will be blue).
2. Connect the relevant cable to the corresponding input on the monitor. The source will be
automatically detected.
3. To change between inputs, press the "Source" button to enter the source menu. Use the
"
"and"
" buttons to choose the input source between
MENU OPTIONS
The menu for the monitor can be accessed by pressing the menu button on the control panel. This menu is
separated into the following sub menus: Picture Settings, Image Settings, Colour Temperature, OSD Settings,
Reset, and M iscellaneous options, details of each menu can be found in the following section.
to navigate and M to select the source.
HDMI1
HDMI2
DP
7
Auto Select,
DP, HDM I1 and HDM I 2.
Advertisement
Table of Contents
