Table of Contents
Advertisement
Shortcut Key Guid e
Activate the Signal Input Selection menu.Use
1
Activeate the Line of Sight feature. Further press to cycle between the colors or tu rn off.
2
Activeate the ECO Mode feature.Further press to cycle through the pr esets.
3
INITIAL SETUP
Connect the monitor to a power outlet.
1.Press the POWER button on the monitor or to turn it on (The indicator will be blue).
2.Connect the relevant cable to the corresponding input on the monitor. The source will be automatically
detected.
3.To change between inputs, press the "Source" button to enter the source menu. Use the
"◄"and"►" buttons to choose the input source between Auto Select, DP, HDMI1 and HDMI 2.
MENU OPTIONS
The menu for the monitor can be accessed by pressing the menu button on the control panel.
This menu is separated into the following sub menus: Picture Settings, Image Settings, Colour Temperature,
OSD Settings, Reset, and Miscellaneous options, details of each menu can be found in the following section.
◄
►
and
to navigate and M to select the sour ce.
DP 1
DP 2
HDMI 1
HDMI 2
5
Advertisement
Table of Contents
