Table of Contents
Advertisement
Inital Setup
Connect the monitor to a power outlet.
1. Press the POWER bu�on on the monitor or to turn it on (The indicator will be blue)
2. Connect the relevant cable to the corresponding input on the monitor. The source will be
automa�cally detected.
3. To change between inputs, press the " E " bu�on to enter the source menu. Use the " " and " "
bu�ons to choose the input source between USB C, DP and HDMI.
Menu Options
The menu for the monitor can be accessed by pressing the "M" button on the control panel. This
menu is separated into the following sub menus: Picture Settings, Image Settings, Color Temperature,
OSD Settings, Reset, and Miscellaneous options, details of each menu can be found in the following
section.
Note:
Some settings may not be adjustable in which case they will be grayed out. This could be due to the
input source or other options chosen within the menus.
USB C
DP
HDMI
6
Advertisement
Table of Contents
