Cleaning The Drain Filter - Fisher & Paykel DISHDRAWER DD24 User Maintenance Instructions

Cleaning the Drain Filter, Spray Arm and Filter Plate
• We recommend that the drain filter is cleaned whenever there is evidence of food particles.
• The spray arm may need cleaning about once a month in normal use or more often should the need arise.
• The filter plate should not normally need cleaning. Food particles remaining on its surface can be wiped off with a
clean, damp cloth.
• If a dishwasher cleaner/descaler is used, you must run a wash program with detergent
• The dishwasher must be used with the filter plate, drain filter and spray arm correctly in place.

Cleaning the Drain Filter

1. Unplug the dishwasher or turn it off at the power supply.
2. To access the drain filter, lift up the plastic grid above it, as shown.
3. Lift and remove the drain filter. It is normal to find some water under it.
4. Empty, rinse clean under running water and replace back into the allocated space.
5. Ensure the drain filter is flush with the filter plate , then lower the plastic grid back into place.
6. Plug the dishwasher back in or turn it on at the power supply.
https://producthelp.fisherpaykel.com/us/Clean/DishDrawer%E2%84%A2/Integrated_Single/DD24SI7/User_Guide_DD24SI7/1...
immediately afterward to prevent any damage to your dishwasher.
Updated: Tue, 16 Nov 2021 11:34:34 GMT
Powered by
2