Safety Notice - Cybertronix Sentinel EFI-MFZ-50 User Manual

Earth fault indicator
Table of Contents

Advertisement

Sentinel™ EFI-MFZ-50

1. SAFETY NOTICE

Review the following safety precautions to avoid serious injury or death and to prevent
damage to this product or any products connected to it. To avoid potential hazards, use
this product only as specified. This equipment contains high voltages. Electrical shock can
cause serious or fatal injury.
PRECAUTIONS
!
WARNING: Under certain fault conditions, high voltages can be conducted
into the earth fault indicator enclosure through the CT, remote indicator, or the
auxiliary relay cables. All parts within the enclosure should be handled as if carrying
dangerous voltages.
WARNING: Use extreme caution during the installation and use of the earth
fault indicator as high voltages and currents may be present in the circuit.
• Ensure that the current sensor is installed at earth potential on the HV cable
system.
• Ensure that the current sensor is installed on the screened part of the cable
system.
• Use caution during the installation and use of this product; high voltages and
currents may be present in the circuit.
• This product must be used only by qualified personnel practicing applicable
safety precautions.
• Wear protective clothing and gloves as required.
• Do not install this product on live conductors.
• Always de-energize circuit before installing the current sensor and indicating
unit.
• Always inspect the current sensor, indicating unit and all leads for damage
before using the product.
• Do not use the product if damaged.
Version 3.0
User's Manual
Page 3 of 15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sentinel EFI-MFZ-50 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents