8.
Close the main valve for the gas cylinder.
9.
Open the release valve for the accumulator gas
charging kit to release the residual pressure.
10. Remove the gas charging hose and gas charging kit from the accumulator.
11. Tighten cap 6 (with O-ring) to the uniform torque.
Cap 6 (with O-ring) Uniform Torque
12. Tighten plug 8 (with O-ring) to the uniform torque, and then check that there is no gas leakage.
Plug 8 (with O-ring) Uniform Torque
80 Nm (59 ftlb)
[100107]
80 Nm (59 ftlb)
[100107]
47