Precautions On Inspection - OKADA TOP Series Owners And Operators Instruction Manual & Parts List

Safety
6. Precaution on inspection
How to inspect
● Before performing inspection, lower the hydraulic hammer on a spacious hand-ground area, and see
that the hydraulic backhoe's safety lock lever is changed over the LOCK position. If the hydraulic
backhoe starts moving during inspection, serious injuries can result.
● Never get on the boom arm of the hydraulic backhoe. If your feet slide, causing you to fall down, serious
injuries may occur.
● During inspection, an "INSPECTION UNDERWAY" label must be suspended from the operation lever.
Because if anyone, unaware of the inspection underway, operates the machine, serious injuries may
result.
●
●
DO NOT OPERATE
INSPECTION UNDERWAY
Action to take when a problem is noted
● If bolts, nuts, and pins are loose, the hydraulic breaker may fall off and cause severe injury. If bolts and
nuts are found loose, tighten them with the proper torque. If pins are fallen off or damaged, replace them
with new ones.
● When cracks are found on the hydraulic hammer bracket or the hydraulic backhoe, promptly repair the
cracks. Never operate the machine with the cracks uncorrected. If the hydraulic hammer or the
hydraulic backhoe arm should fall from the cracked portion, serious injuries may occur.
11