Sharpening Knives - ALDI FERREX 705715 User Manual

65 W Multifunctional sharpener
12) Check the leading edge of both flutes are
equally sharp. They should meet exactly in the
middle as in Fig B10, not B11.
13) When you have finished sharpening, turn off
the sharpener by moving the on/off switch (10) to
the "O" position.
WARNING: Before removing the module,
ensure the grinding wheel has stopped.

Sharpening knives

WARNING: Before assembling the knife &
scissor sharpener module (7) , be sure the
sharpener is unplugged and the on/off switch
(10) is in Off ''O'' position.
NOTE: This module is suitable for all straight
edged, household knives and scissors only. Do
not use serrated edged blades.
1) Slide the knife & scissor sharpener module (7)
onto the side of the sharpener with the grinding
wheel (1) . Make sure the knife & scissor sharpener
module (7) is locked in place.
2) Insert the plug into the mains power socket
and switch on the power. Move the on/off switch
(10) to the "I" position to turn the sharpener on.
3) Hold the knife handle towards you and insert
the blade end of the knife into knife sharpening
slot (9) (See Fig. C1).
4) As soon as the blade touches the grinding
wheel (1) , draw it with light steady pressure
across the wheel to the tip, then remove. Do not
press hard.
5) Insert the opposite side of the blade into the
other top guide slot and repeat step 4 (See Fig.
C2).
6) Repeat sharpening each side in turn until a
clean sharp edge is attained.
7) When you have finished sharpening, turn off
the sharpener by moving the on/off switch (10)
to the "O" position. Before removing the module,
ensure that the grinding wheel has stopped.
AFTER SALES SUPPORT
1300 889 028
(toll free)
B10.
B11.
C1.
C2.
e-mail: info.aldi@positecgroup.com
MODEL No.: BDS651 • 05/2021 • 705715
12