Thank you for purchasing the SPEDAL C326 2K Dashcam. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team and send your product model number and order number to us: support@spedaltech.com...
SAFETY INSTRUCTIONS Warnings ● Do not install or operate the dashcam with wet hands. ● Do not install the dashcam in places with high humidity, flammable gases, liquids, and positions blocking the sight of the driver or the safety area. ●...
INSTALLATION GUIDE Installation Position ● Do not install the dashcam in a position that will block the view of the driver or in Dashcam an unsafe area. ● Install the dashcam near the rearview mirror but not in a place that will block the vision of the driver.
GENERAL SETTINGS Resolution Choose recording resolutions from 1440P30 2560*1440 / 1296P30 2304*1296 / 1080P60 1920*1080 / 1080P30 1920*1080 / 720P60 1280*720 / 720P30 1280*720. Video Duration Choose a time length from 3 / 5 / 10 minutes for each video recording.
FUNCTION INTRODUCTION Video Recording ● Loop Recording The dashcam will start video recording automatically after powering on. When the TF card storage is full, old footages will be replaced by new ones automatically if the old ones are not locked. You can choose 3 / 5 / 10 Minutes for the video length.
1. Connect the dashcam (with TF card inserted) to your computer using your own USB mini-B data cable (the included cable is for power supply only). It should be recognized as a removable device. 2. Find the video recording files located in the \SPEDAL\Movie folder. Find the snapshots in \SPEDAL\Photo.
Scan the QR Code Scarica manuali in altre lingue dalla nostra homepage. Pobierz instrukcje obsługi w innych językach z naszej strony internetowej. Ladda ner manualer från andra språk från vår hemsida. For any questions please contact support@spedaltech.com www.spedal.cc - 07 -...
Need help?
Do you have a question about the C326 and is the answer not in the manual?
Questions and answers