54
8.5 Removal of the Bake Element
Remove the product from the joinery
•
Remove the rear panel to gain access to the
•
bake element.
Remove wiring to the element.
•
Lift the insulation to gain access to the
•
securing screws.
Remove the screws and slide the element
•
out from under the oven cavity.
8.6 Removal of the Cavity Fan
Remove the product from the joinery
•
Remove the fan shroud as per instruction 8.2.
•
Remove the fan blade by removing the nut, hold
•
the fan blade while undoing the nut, which is left
hand thread.
Remove the rear panel to gain access to the fan
•
motor.
Remove the wiring to the fan motor, and then
•
remove the 3 screws and pull the fan motor out
from the cavity.
Reassemble in reverse order.
•