Fisher & Paykel OB60C Series Service Manual page 36

36
4.8 Trouble shooting PYRO
PROBLEM
Self Clean function (some models only)
I have cancelled a Self
Clean cycle but cannot
use the oven:
the oven door will
not open
the display is still
counting down
minutes or showing
:
the Self Clean
function indicator
is still lit the
temperature
indicator shows
cascading bars
the dials and controls
are unresponsive.
The oven is beeping and
the display shows
or .
There is a power cut
during a Self Clean
cycle.
POSSIBLE CAUSES
This is normal: if the function
dial halo is unlit, you have
successfully cancelled the
Self Clean cycle. However, the
oven is still too hot to be
used for cooking and
needs to cool down.
See section 'Alert codes' for instructions.
Power cut.
WHAT TO DO
Wait until the cool-down
phase has finished. A
long tone will sound
and the oven door will
automatically unlock when
the oven is ready to use.
Note: depending on when
the Self Clean cycle was
cancelled, the cool-down
phase may take up to 45
minutes.
The door will remain
locked. Once the power is
turned back on, the door
will remain locked until the
oven has cooled to a safe
temperature.