Page 2
IOGEAR 16560 Aston Street Irvine, CA 92606 Phone: (949) 250-1260 Toll Free: (888) 999-2836 Fax: (949) 250-1262 www.iogear.com info@iogear.com...
Page 3
Macintosh, G3/G4 and iMac are registered trademarks of Apple Computer, Inc. ATEN is a registered trademark of ATEN Technology, Inc. IOGEAR is a registered trademark of ATEN Technology, Inc. ATEN Technology makes no warranty of any kind with regards to the information presented in this document.
Page 4
Package Contents Package Contents This IOGEAR package contains: G-CV160 Mac – PS/2 Adapter ADB Patch Cable Mac Video Patch Cable User Manual & Setup Guide Product Registration / Warranty Card Please check to make sure that all components are included and nothing is damaged. If you discover a problem, please contact your dealer.
Introduction Introduction Thank you for purchasing IOGEAR’s MiniView Mac Adapter, a Macintosh-PS/2 converter that allows seamless integration of a Macintosh computer into your existing KVM configuration. Our Mac Adapter is fully compatible with older Macintosh systems, the new iMac, G3 and G4.
Features / System Requirements Features / System Requirements Features Converts from ADB and DB-15 to PS/2 and HDB-15 Allows a Macintosh system to be incorporated into your KVM setup. Secondary ADB port provides support for additional Macintosh accessories. Full Mac functionality supported on a PS/2 keyboard No software required.
Installation Installation Installation in a KVM setup: Before installing your G-CV160, please make sure your Macintosh is powered OFF. Connect the PC keyboard and mouse ports on the G-CV160 to one of the PC ports on your KVM switch. Be sure the keyboard port on the KVM switch is connected to the key- board port on the G-CV160, and the same is true for the mouse ports.
Installation Installation Before installing your G-CV160, please make sure your Macintosh is powered OFF. Installation without a KVM switch: Connect your PS/2 keyboard and mouse to the PC ports on the G-CV160. If you have an older Macintosh with DB-15 (Mac video) connectors, connect your monitor to the PC video port on the G- CV160.
Dip Switches Dip Switches Note: Do not modify the DIP Switches when your Macintosh is powered-ON. Switches 1-6 are used to set the appropriate video properties for your configuration. *1 – When SW5 and SW6 are both ON, the VGA and SVGA resolution settings are selected in the monitor portion of the control panel.
Dip Switches Dip Switches Switch 7 is used to toggle between a standard 101 and 104 key keyboard. Switch 8 toggles the mouse between high and normal speed settings.
Radio Interference / Limited Warranty Radio Interference / Limited Warranty Radio & TV Interference Statement This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Contacting IOGEAR Contacting IOGEAR In the event that your MiniView fails to function properly, or you wish to contact us for any other reason, here are a few ways to contact us. IOGEAR 16560 Aston Street Irvine, CA 92606 Phone: (949) 250-1260...