Fisher & Paykel ACTIVESMART RF730Q User's Installation Manual page 21

To flush the automatic icemaker
1
Empty the water in the bin and return the bin correctly. Ensure that the scoop is located in
front of the bin.
Once your ice maker is turned on, discard the first full bin of ice. This will flush away any
impurities in the water line and ensure the best ice quality.
Carrying out the above steps after a holiday/vacation or extended periods of not using ice.
Ice Boost
increases ice production by up to 30% and will automatically deactivate
ICE BOOST
after 24 hours.
1
2
USING YOUR APPLIANCE
+
Press and hold
four seconds.
The ice tray will flip twice and empty the
water into the bin below. Repeat the cycle
to help remove any dust in the ice tray
collected during manufacture and transport.
To activate, press the
The light next to the feature
ICE BOOST.
will flash.
Press the button for two seconds until the
light turns solid.
To deactivate, press the
to
ICE BOOST.
Press button for two seconds.
When is deactivated the light will
ICE BOOST
not illuminate.
Deactivating ice making automatically
deactivates the 'Ice Boost' function
, and together for
button, scroll to
button, scroll
21