Fisher & Paykel ACTIVESMART RF730Q User's Installation Manual page 28

Humidity control lid large
To remove
1
2
Humidity control lid large
To replace
1
2
28
CLEANING AND CARE
Remove the large humidity bin, refer to
the section 'Humidity bin large'.
Locate the lip at the front of the humidity
control lid and firmly pull down in the
middle. Then pull the lid down at the
back sides to dislodge.
Put the humidity lid into the correct
position. Slot the front of the humidity lid
back into place.
Once the front is in place, push the
back and sides of the humidity lid into
position.