Fisher & Paykel ACTIVESMART RF730Q User's Installation Manual page 16

Information about your ice maker
Your automatic ice maker will produce eight cubes of ice every 2 – 3 hours, depending on
the freezer compartment temperature and the number of door openings.
The ice tray will fill with water. When cubes are frozen, they will be ejected from the ice tray
into the ice storage bin. Ice making will continue until the storage bin is full. Ice making will
resume once you start to use the stored ice.
Your Ice & Water product comes with a smaller ice bin inside a tray. Attached to the ice
storage bin is the scoop for the ice. This scoop provides hygienic access to the ice. For
maximum ice storage, level the stored cubes with the ice scoop. Do not remove the ice bin
when using the ice making function.
If ice is not used often, old cubes will become cloudy, taste stale, will shrink and may
stick together. Empty the ice storage bin periodically and wash in lukewarm water. Dry
thoroughly and place back into the correct position.
Turn your ice maker off if:
There is no water supply for several hours.
z
You are removing the ice storage bin for a period of time.
z
You are going on holiday/vacation.
z
Glass shelves
There are two glass shelves that can be repositioned in the fridge compartment.
We do not recommend moving the bottom glass shelf from above the bins.
Humidity control lids
The humidity control lids are fitted to the bins in your fridge compartment.
These lids provide a humid microclimate to extend the storage times of fruit and
vegetables.
The lids have specially designed grooves that retain moisture to prevent condensation
from dripping onto the fruit and vegetables at times of high humidity.
16
USING YOUR APPLIANCE