Table of Contents
Advertisement
7
Operating the STAP
Diagnostics Menu
psvolts: (power supply voltage)
err_rpt: (error report numbers)
Calibration Values Menu
flow_c2: (flow x2 coefficient)
flow_c1: (flow x coefficient)
flow_c0: (flow offset coefficient)
flwcalt: (temperature during calibration)
prsslop: (slope for pressure reading)
prsoffs: (offset for pressure reading)
vltslop: (slope for power supply voltage reading)
vltoffs: (offset of power supply voltage reading)
Raw Readings Menu
flw_raw: (raw LFE flow reading (0-4095) )
prs_raw: (raw pressure reading (0-4095) )
vlt_raw: (raw power supply reading (0-4095) )
Manufacture Info Menu
The Manufacture Info menu displays the following lines:
version: (firmware version)
ser_num: (serial number)
mfgyear: (mfg year)
mfg_mon: (mfg month)
mfg_day: (mfg day)
All settings and calibration values are saved to the on board EEPROM memory when
users return to "READINGS" mode from "DEFAULT SETTINGS" mode. If changes are
made without returning to "READINGS" mode, e.g. powering off while in "DEFAULT
SETTINGS" mode, the new settings will not be remembered.
83-00036-01A
STAP 9406
Page 32 of 46
Advertisement
Table of Contents
