Table of Contents
Advertisement
7
Operating the STAP
SD Card Menu
Rotate the data knob to select the SD Card menu. The menu will display the following
lines:
SD Save: (Off/On)
File: (Current Filename)
Files: (Total number of files on SD Card)
Size: (SD Card size in megabytes)
Used: (% of the SD Card currently filled)
The only user-settable item in this menu is 'SD Save', all other items are set by the STAP
automatically. A quick push of the data knob will select the SD Save value, rotate the
knob to change the value.
Filter Menu
The Filter menu controls new filter initialization and is the default startup menu each
time the STAP is powered on. Follow instructions provided by the firmware to initialize
a new filter. See details above for the initialization process.
STAP Control Menu
Rotate the data knob to select the STAP Control menu. A quick push of the knob will allow
the STAP to be turned Off or On. The menu will display the following lines:
Sample Interval: (1-60 seconds, can only be changed in settings mode)
Flow: measured sample flow / flow setpoint (both in lpm)
P: pump power (0-200 = duty cycle 0-100%)
Pres: (pressure in mbar)
Temp: (temperature in deg C)
83-00036-01A
STAP 9406
Page 30 of 46
Advertisement
Table of Contents
