Empty The Water Tank - Waykar PD100A User Manual

OPERATION INSTRUCTIONS

5. Empty The Water Tank

Water Tank Drainage
Before starting the machine, please ensure that the air outlet has been opened,
otherwise the machine will overheat.
Do not stop by directly unplug the power line.
When the water tank is full, the water full indicator will light up, the dehumidifier
will automatically shut down until the tank has been emptied and placed back to
the unit.
Ways to Empty the Water Tank
Hold the water tank with
both your hands, and
pull out the tank gently.
Note:
Do not remove the float from the water tank. If the float in the water tank is
removed, the sensor may not be able to determine the water level stored in
the tank properly that may lead to water overflow leak from the water tank.
If the water tank is dirty, just use cold water or warm water to clean it. Do not
use detergent, steel wool, chemically treated dust cloth, gasoline,benzene,
thinner or other solvents. Otherwise, it may damage the water tank and cause
it to leak.
When placing back the water tank, use your hands to press the tank back in
its place. If the water tank is not placed properly, sensors or protections from
water overflow may not operate as expected.
Put the water tank back
in place and the full tank
indicator will go out.