Advertisement
Quick Links
Specifications
• Handmade in Italy since 1960
• ¼ Turn valves handmade at
Nicolazzi Factory
• Lead Free Brass Compliant to
AZ/NZS 3718
• Suitable even and uneven
pressure
• Handles are interchangeable
Further information Phone (03) 9761 4603
TAP MIXER FOR EXTERNAL COLUMN SHOWER
Art: Z2225--29
Available replacement
handles:
-
27 Monte Carlo Handle
-
29 Mac Kinley 05 Handle
WM22315
AS/NZS3662
Canterbury Sink & Tap Co.
Max/Min Operating
Pressure: 100/500kPa
sales@sinkandtap.com.au
Advertisement
Related Manuals for CANTERBURY Z2225-29
Summary of Contents for CANTERBURY Z2225-29
- Page 1 • ¼ Turn valves handmade at Nicolazzi Factory • Lead Free Brass Compliant to WM22315 AZ/NZS 3718 AS/NZS3662 • Suitable even and uneven Canterbury Sink & Tap Co. pressure Max/Min Operating Pressure: 100/500kPa • Handles are interchangeable Further information Phone (03) 9761 4603 sales@sinkandtap.com.au...
- Page 2 Important Notice Model : Z2225 CAREFULLY READ THROUGH THESE INSTRUCTIONS BEFORE INSTALLATION AND USE OF ALL TAP WARE AND WALL VALVES INSTALLATION and WARRANTY INSTRUCTIONS TECHNICAL INFORMATION All flexible hoses are designed and manufactured for use with water in exposed locations only. Do not expose to household cleaners, chlorine, chloride, hydrochloric acid or other corrosive chemicals.
- Page 3 Installation Instructions Model : Z2225 Preparation Flush out the pipework to remove any foreign matter. The hot supply should be on the left when viewed from the front of the fitting. Assembly ❶ Connect the ¾” male to ½” female bush adaptors (A), to the1/2”...
-
Page 4: Before Use
Installation Instructions Model : Z2225 ❸ Fix the body of the wall mixer (D), placing the fibre washer (C), between the nut and the ¾” male to ½ “ female bush adaptors. Ensure all connections are firmly tightened. Before use ... - Page 5 Spare Parts list Model : Z2225 Further information Phone (03) 9761 4603 sales@sinkandtap.com.au...
- Page 6 Care and Maintenance Instructions Model : Z2225 MAINTENANCE FOR WALL MOUNTED TWO LEVER TAP WARE INSTRUCTIONS FOR REPLACEMENT OF THE HOT OR COLD CARTRIDGE Do not replace the cartridge if there is low flow or no flow. Low flow or no flow is caused by obstruction or kinking of supply hoses.
- Page 7 Care and Maintenance Instructions Model : Z2225 Removing and replacing a handle MODEL SHOWN :Z2225--29 ❶ ❷ Loosen and unscrew the retaining flange Once totally loose, simply remove the A, from the tap body. handle from cartridge spline. ...
- Page 8 Care and Maintenance Instructions Model : Z2225 LOW FLOW OR NO FLOW TROUBLESHOOTING INSTRUCTIONS Current bathroom taps have a max flow rate of 7 Litres per minute from the aerator. If you are experiencing low flow from the spout: Do not change the cartridge •...
- Page 9 Care and Maintenance Instructions Model : Z2225 Care of external finishes Nicolazzi products are all authentic finishes that have not been coated with any product. After each use, pat the fixture down to remove any excess water. This will prevent any water spotting or mineral build-up. Use only soft liquid soap and water to clean the surface.