Table of Contents
Advertisement
Quick Links
Specifications
• Handmade in Italy since 1960
• ¼ Turn valves handmade at
Nicolazzi Factory
• Lead Free Brass Compliant to
AZ/NZS 3718
• Suitable for even and uneven
pressure
• Handles are interchangeable
Further information Phone (03) 9761 4603
Single lever concealed shower mixer with diverter & finished set
Art: Z3460
Available replacement
handles:
-75 El Capitan
-
76A M. Blanc Crackle
-33 Swarovski Crystal
WM22315
AS/NZS3662
Canterbury Sink & Tap Co.
Max/Min Operating
Pressure: 100/500kPa
sales@sinkandtap.com.au
-76 Mont Blanc
-76B M. Blanc Black
Advertisement
Table of Contents
Related Manuals for CANTERBURY Z3460
Summary of Contents for CANTERBURY Z3460
- Page 1 • ¼ Turn valves handmade at Nicolazzi Factory • Lead Free Brass Compliant to WM22315 AZ/NZS 3718 AS/NZS3662 • Suitable for even and uneven Canterbury Sink & Tap Co. pressure Max/Min Operating Pressure: 100/500kPa • Handles are interchangeable Further information Phone (03) 9761 4603 sales@sinkandtap.com.au...
- Page 2 Important Notice Model : Z3460 CAREFULLY READ THROUGH THESE INSTRUCTIONS BEFORE INSTALLATION AND USE OF ALL TAP WARE AND WALL VALVES INSTALLATION and WARRANTY INSTRUCTIONS TECHNICAL INFORMATION All flexible hoses are designed and manufactured for use with water in exposed locations only. Do not expose to household cleaners, chlorine, chloride, hydrochloric acid or other corrosive chemicals.
- Page 3 Installation Instructions Model : Z3460 Preparation Flush out the pipework to remove any foreign matter. The hot supply should be on the left when viewed from the front of the fitting. Assembly ❶ Connect the hot and cold water supply to the mixer body 1, using 1/2”...
- Page 4 Installation Instructions Model : Z3460 ❸ Slide the cover pipe 5, over the outer surface of the mixer body. Fit the nut cover ring 6, securely in the cover pipe by pressing it down firmly into its correct seating position. The O-ring on the cartridge nut should hold the nut cover ring in position.
- Page 5 Installation Instructions Model : Z3460 ❹ Carefully install the dome handle 8, onto the mixer cartridge leaver. Note: Ensure that the cartridge leaver is correctly seated in the leaver handle slot. Carefully raise the leaver dome handle ❹...
- Page 6 Installation Instructions Model : Z3460 ❸ Using the Allen key, firmly hand tighten the grub screw and secure the dome leaver onto the mixer leaver. Install the indice button 10, into the access ❹ hole, and ensure that it is firmly pressed into position.
- Page 7 Spare Parts list Model : Z3460 Further information Phone (03) 9761 4603 sales@sinkandtap.com.au...
- Page 8 Care and Maintenance Instructions Model : Z3460 Care of external finishes Nicolazzi products are all authentic finishes that have not been coated with any product. After each use, pat the fixture down to remove any excess water. This will prevent any water spotting or mineral build-up. Use only soft liquid soap and water to clean the surface.
Need help?
Do you have a question about the Z3460 and is the answer not in the manual?
Questions and answers