Maintenance; Jetstream Maintenance Schedule - Squid Ink JetStream User Manual

Maintenance

The JetStream requires regular maintenance in order to function properly. This section
describes basic maintenance procedures that can be performed by an operator.
WARNING: When working with inks and fluids, always wear gloves, safety
glasses, and protective clothing. Avoid skin contact with inks and fluids. Never look
directly into the Printhead Nozzle. Ensure proper ventilation to minimize fumes.

JetStream Maintenance Schedule

Task
Start Jetting With Cleaning
Stop Jetting With Cleaning
Check inside Printhead for ink
build-up
Clean the Printhead
Install new Ink Container
Install new Makeup Container
Have distributor replace the
Main Filter Assembly
Have distributor replace the Ink
Feeding Filter (PN: 2006593)
Have distributor replace the Ink
Return Filter (PN: 2006709)
Have distributor replace the
Cleaning Filter (PN: 2006593)
Clean the Air Filters
Upgrade JetStream system
software
Once daily – beginning of day (see "Daily Maintenance" on page 142)
Once daily – end of day (see "Daily Maintenance" on page 142)
Once daily (see "Cleaning the Printhead" on page 142)
Every 3 days at the beginning or end of day, and as needed (see
"Cleaning the Printhead" on page 142)
When current Ink Container is empty – "Ink Shortage" is displayed on
screen (see "Installing or Changing the Ink and Makeup Fluid" on
page 55)
When current Makeup Container is empty – "Solvent Shortage" is
displayed on screen (see "Installing or Changing the Ink and Makeup
Fluid" on page 55)
Every 6000 hours of run time (see "Replacing the Main Filter
Assembly" on page 159)
Same time as Main Filter Assembly replacement
Same time as Main Filter Assembly replacement
Same time as Main Filter Assembly replacement
As needed (see "Replacing or Cleaning the Air Filters" on page 164)
As available: Squid Ink notifies customers of software upgrades via
email (see "Upgrading the System Software" on page 166)
Maintenance 141
Frequency
2006792 Rev B – 200228