KYOTA M680 Assembly Manual

Step 15:
15
Position the back cover so that
the ball and socket fasteners
are aligned, then press into
place until you feel a snap to
secure. Insert M5x20 screws
into the four screw holes.
Tighten with the phillips head
end of the M6 hex key.
Step 16:
16
Plug the remote control cord into the remote
control port located under the right side of
the seat cushion. Ensure the arrows on the
top of the remote control cord and the
remote control port are aligned before
connecting. Screw on to fasten. Do not force.
Step 17:
17
Connect the chair power cord to a grounded 110V electrical outlet and
plug it into the respective port on the back side of the base of the
chair (see step 2). Flip the main power switch to on.
Power on the Review chair for smooth operation. If things are not operating
remote and select correctly, review all assembly steps. Call Kyota support at
AUTO program to
800-242-0761 if you need live US-based support.
start a session.
You are done; time for a Massage!
Register your product at www.kyotamassagechairs.com/
warranty/registration to ensure it is in our system.
This will simplify the warranty process should you ever need it.
Alternatively, scan the QR code to go directly to the URL above.
SCAN CODE
72 Stard Road, Seabrook, NH 03874 | (800)-242-0761 | www.kyotamassagechairs.com
Ball and Socket
Fasteners x4 M5x20 Screw
Back Cover
Screw Holes
Remote Control
Remote Control
Cord/Port Connection
The Worlds Most
Advanced Massage Chairs
Version 2.0
The Worlds Most
Advanced Massage Chairs
Assembly Guide
M680 Kaizen 3D/4D
Massage Chair