1
2
3
4
ATTACH DRAWER PANEL
Hook the drawer panel onto the
drawer front channel.
Close the drawer and check vertical
clearances.
Remove the panel and adjust the
top attachment hooks as necesary.
Replace the panel on the drawer and
confirm vertical clearances.
5
6
7
1/16" (2mm)
8
Slide the panel to achieve even
horizontal clearances.
Open the drawer and clamp the
panel onto the drawer by tightening
the bottom attachment hook.
Close the drawer and ensure it is
flush with the adjacent cabinetry.
If not, the product may have to be
pulled back or forward.
Ensure there is clearance between
the panel and cabinetry when the
drawer is fully closed.
17