Advertisement

Congratulations on your decision to add HydroMassage to your business. HydroMassage has been trusted by
doctors and industry leaders for over 20 years to provide clients with a convenient way to deliver the benefits of
a 10-15 minute heated massage every day.
JTL Enterprises Inc / HydroMassage®
15395 Roosevelt Blvd
Clearwater FL 33760
727-536-5566 Fax +1-727-536-6633
www.HydroMassage.com info@hydromassage.com
Key Departments:
Technical Support: 1-800-699-1008 x 1013
Marketing Support: 1-800-699-1008 x 1027
Admin / Logistics: 1-800-699-1008 x 1010
Accounting: 1-800-699-1008 x 1016
Mission
Our mission is to improve the health and well being of the individual by providing the most effective dry
hydrotherapy systems available. Build value for our stakeholders through the strength of our customers'
satisfaction, a continued focus on innovation, our dedication to operational excellence and the personal and
professional growth of our employees.
Manufacturing
All JTL products are manufactured in the United States, meeting UL / CE / CSA safety standards as well as
being registered as a Class I medical device with the FDA. Each component must first pass a rigorous 5,000
hour life expectancy test before being used in production. During production, each product must pass a 268
inspection checklist, receive approval from four different employees and managers, and undergo a 24 hour
testing process before being considered ready for shipment. All products come with a two year warranty on all
moving components and a three year warranty on major structural elements.
HydroMassage Master Code # 120700
Trademarks
HydroMassage
®
is a registered trademark of JTL Enterprises, Inc.
Notice of Copyright
HydroMassage
®
Owner's Manual © October 2010 JTL Enterprises, Inc. All rights reserved.
Disclaimer
While every precaution has been taken to ensure the accuracy of the contents of this manual, JTL Enterprises,
Inc. assumes no responsibility for errors or omissions. Please note that the information contained herein,
including but not limited to models, specifications, options, accessories, supplies, and prices, is subject to
change without notice.
Please visit
http://www.hydromassage.com/Customer-Support.htm
and installation resources.
Introduction to HydroMassage
HydroMassage Owner's Manual, Revision 10-25-15
JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com
Page 1 of 33
®
for additional marketing, technical support,

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Lounge 440 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for HydroMassage Lounge 440 Series

  • Page 1 Introduction to HydroMassage ® Congratulations on your decision to add HydroMassage to your business. HydroMassage has been trusted by doctors and industry leaders for over 20 years to provide clients with a convenient way to deliver the benefits of a 10-15 minute heated massage every day.
  • Page 2: Table Of Contents

    14                 Touchscreen Installation    .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  15‐17  7.  Initial Start Up    .   .   .   .   .   .   .   .   .   .   .   .  .  .   .   .   .   .   .   .  .   .   .   .   .   .    18‐21                  Final Assembly        .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .     22                  Post Installation     .  .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .     .   .   .   .   .     23  8.  HydroMassage Touchscreen Overview   .   .   .   .   .   .  .  .   .   .   .   .  .   .   .   .     24                  Touchscreen Features   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .  25‐27  9. External Timer Connection Instructions   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .     28  10. External Cooling System Venting     .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .     29  11. Recommended Maintenance   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   30  12. Recommended Reboot Procedure   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   28          HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com Page 2 of 33...
  • Page 3: Limited Warranty

    Specific legal rights: This limited Warranty gives you specific legal rights which may vary from state to state. HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com Page 3 of 33...
  • Page 4: Disclaimers

    This entire agreement is embodied in this writing and no other warranties exist. This writing constitutes the final expression of the parties’ agreement and is the complete and final statement of the terms of the agreement. HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com Page 4 of 33...
  • Page 5: Precautions And Contraindications

    *IMPORTANT: Any person with a specific medical condition upon which heat or massage might have an adverse effect should consult a physician prior to use. HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com Page 5 of 33...
  • Page 6: Safety Considerations

    If the External Cooling System is to be installed anywhere other than on the ground, check to ensure it • is securely mounted. HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com Page 6 of 33...
  • Page 7 Max Resolution 1024x768 pixels at 75 Hz Temperature Parameters Operating: 41°F to 95°F Weight 7.82 lb (3.1 kg ) Input Requirements Any object (finger, etc.) HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com Page 7 of 33...
  • Page 8 International installations: please have your electrician install an appropriate plug and receptacle according to code • Requires a 110 Volt outlet within 5’ of the center of the HydroMassage Lounge. • CAT 5 or Cat 6 Internet / Network connection at least 6’ from Lounge Please be sure your electrical installation is completed before the unit arrives.
  • Page 9: Delivery / Unpacking Instructions

    Lounge 5. Remove plastic shrink wrap around Lounge 6. Unsnap and remove Use small scissors (not a knife or razor). cover sheet and comfort pad HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com Page 9 of 33...
  • Page 10 Remove 4 packing bolts, BLUE Remove the Touchscreen Computer 2 on each side of the Lounge And Supply Boxes Touchscreen Arm Tie Wrapped to Frame HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com Page 10 of 33...
  • Page 11 Slowly roll the Lounge towards and down the ramp at the head end of the skid until the Lounge has cleared the mounting blocks. You can then lower the Lounge down onto the 4 casters on the bottom of the frame. HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com Page 11 of 33...
  • Page 12 5/8” adjusting nut 3) Put side and end panels back on unit. Use black thumb screws from Parts Supply Box to secure end panels          HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com Page 12 of 33...
  • Page 13 Any additional items as specified on the invoice • **THIS IS THE END OF THE DELIVERY / UNPACKING INSTRUCTIONS. INSTALLATION INSTRUCTIONS BEGIN ON NEXT PAGE** HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com Page 13 of 33...
  • Page 14: Touchscreen Components

    Touchscreen Pole Touchscreen Adjustment Mounting Allen Wrench to tighten Touchscreen Pole if Battery Backup necessary. Found in bag attached to frame. HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com Page 14 of 33...
  • Page 15 If external cooling system will be installed on the HydroMassage room floor, ensure there is sufficient space available for cooling unit, and allow for a minimum of 12” of space for both the intake and exhaust vents of the cooling unit.
  • Page 16 5) Neatly coil the excess cooling system tubing, and secure to the inside of the Lounge frame with a Allow for a minimum of 3’ of excess wiring to enable reusable tie supplied (do not squeeze tubing). movement of HydroMassage unit during servicing or maintenance HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com...
  • Page 17: Touchscreen Installation

    Plug the communication cable with the clips on top of cable into the #4 port on the the control box side of the control box HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com Page 17 of 33...
  • Page 18 Battery Backup Touchscreen Power Cord 5) Connect Touchscreen Communications Cable #4 to Control Box. 6) Neatly secure Touchscreen wiring to HydroMassage frame. Pictures illustrate proper Touchscreen wiring • HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com...
  • Page 19 8) If installing T-Max or other remote usage controls, make connections at this point. See Page 28 for wiring diagram • Call HydroMassage technical support at 727-536-5566 with questions. • HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com...
  • Page 20: Initial Start-Up

    Initial Start-up ® 1) Make sure HydroMassage power cord is NOT plugged into 220V outlet. If the Touchscreen is not turned on, the Lounge should never be plugged in at the 220V electrical outlet. 2) Underneath Lounge, check to ensure two PVC pump unions are tight.
  • Page 21 **IMPORTANT: Do this first before plugging 220V electrical cord into the wall outlet. The • HydroMassage software will boot up automatically on the screen. Wait until you see an “Establishing Communication” window on the Touchscreen before plugging in 220V outlet.
  • Page 22 Water Filler Spout Cap 11) Press green start button on Touchscreen to turn on HydroMassage for the first time. Check under unit for any visible signs of leaks • Massage Area Start Limits Button Massage Massage Pressure Travel Speed 12) If “Water Temp Cold” Warning Message is displayed on Touchscreen, simply begin a massage session to raise water temperature.
  • Page 23 2-3 degree temperature differential. Hold a piece of paper up against the fans to test if they have been activated. o The internal cooling system has fans under the panel at the head end of the Lounge Call HydroMassage Technical Support at 727-536-5566 if cooling system is not functioning properly. • HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 •...
  • Page 24: Final Assembly

    • side for the Touchscreen Mount. Comfort snaps 5) Contact HydroMassage Technical Support Department at 727-536-5566 to install HydroMassage Desktop Software and Remote Access Software ( if applicable) HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com Page 24 of 33...
  • Page 25: Post Installation

    Recommended Maintenance instructions suggest doing this every 3 months. This is also a good time to clean the machine if maintenance has not been performed in the past 12 months. The HydroMassage Lounge should be rebooted at least 1X per week. This often resolves any minor •...
  • Page 26: Hydromassage Touchscreen Overview

    Touchscreen Overview ® The HydroMassage Touchscreen is a feature that was designed to increase the functionality, ease of use, and overall level of enjoyment of a HydroMassage Dry Hydrotherapy system. In addition to allowing the user to adjust the pressure, speed, target areas, and time of massage, the Touchscreen also adds entertainment features including music, games, videos, books, self awareness and internet and more.
  • Page 27: Touchscreen Features

    Time before beginning the massage, press either the Up or Down arrows directly to the right of the clock. To change the default time, see “Adjusting Defaults” under Advanced Features. HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com Page 27 of 33...
  • Page 28 Member Management. This is very valuable tool if you would like to generate recurring revenue from your HydroMassage. You can use the Member Management System to sell packages by, the minute, day, week, or month and limit usage. The information for the members that have access to the HydroMassage is kept in the User Database.
  • Page 29 Open Advanced Options, Click on the LED Color box to open the LED Color Picker Select desired color and close Default Blue is Red 27 Green100 Blue 70 Use the slide bar to adjust, then click close HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com Page 29 of 33...
  • Page 30 HydroMassage External Timer Connection Diagram ® HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com Page 30 of 33...
  • Page 31 (Optional for 320, HydroMassage Chimney / External Cooling System Heat Exhaust ® 350, 450, 500, and 700 Series) HydroMassage Owner’s Manual, Revision 10-25-15 JTL Enterprises, Inc 1-727-536-5566 • www.HydroMassage.com Page 31 of 33...
  • Page 32 HydroMassage Maintenance Schedule Weekly: 1. Reboot the HydroMassage (instructions below). 2. Clean waterproof cover sheet according to your normal cleaning procedures for all other equipment. Every 3 Months: Add Defoamacide to ensure the water pressure stays consistent and clean. **ONLY USE HydroMassage Defoamacide.**...
  • Page 33 HydroMassage software to automatically load on the Touchscreen monitor 4. Once the HydroMassage software loads on the Touchscreen, and only after you see a “Establishing Communication” box pop-up, plug the HydroMassage 220V electrical cord back into the wall outlet.

This manual is also suitable for:

Lounge 450 series

Table of Contents

Save PDF