Remove & Close The Lens Cover; Placing Of Your Projector - ZEROSKY PJ-32C Instruction Manual

Remove & Close The Lens Cover
Remove the lens cover before using

Placing of Your Projector

Your projector can be installed in four different configurations
(see picture below):
Front Table:
Select this location with the projector placed near the floor in
front of the screen. This is the most common way to position the
projector for quick setup and portability.
Rear Table:
Select this location with the projector placed near the floor
behind the screen.
NOTE: That a special rear projection screen is required.
Front Ceiling:
Select this location with the projector suspended upside-down
from the ceiling in front of the screen.
NOTE: A projector mount is required to install the projector in a
ceiling.
Rear Ceiling:
Select this location with the projector suspended upside-down
from the ceiling behind the screen.
NOTE:
5
Close the lens cover when unit is not using