Using Tf Card And Usb Playback Dmp (Media Player) - ZEROSKY PJ-32C Instruction Manual

Using TF Card And USB Playback DMP (Media Player)

Install USB / TF device:
1. Turn off the unit before install USB / TF card.
2. Install the USB device into USB port.
3. After connect, press the
GREEN.
4. Press the / SOURCE button to enter and use
mode.
5. After selection, use
press the button to enter. If necessary, use the
USB and press the
6. Use buttons to search the correct file and press the
playback file and press the
7. Press button to fast search forward and rewind.
8. Press button to search next or previous file.
9. During playback, press the
NOTE: Remove USB / TF device, press the
1. When photo playback, press
the button and more
function screen show on lower
(figure 1).
2. Use the
icon and press the
to play special function.
1. When music playback, press
the button and more
function screen show on lower
(figure 2).
2.
Use the
icon and press the
to play special function.
1. When movie playback, press
the button and more
button to turn on unit and the power indicator light
buttons to search the PHOTO / MUSIC / MOVIE icon and
button to enter.
/ EXIT button or
button to pause and press again to resume.
Sub-Menu on Photo screen
button to select
button
Sub-Menu on Music screen
button to select
button
Sub-Menu on Movie screen
buttons to search the DMP
button to select TF card or
button of remote to start playback.
button to turn off power FIRST.
Figure 1.
Figure 2.
Figure 3.
14
button to preview