Table of Contents
Advertisement
- Press to mute the audio. Press again to resume.
Connect HDMI Show The Image On Projector Screen
Refer to the following picture to connect a set top box, a BD/DVD player or a streaming
player to the HDMI input.
1.
Turn off the unit before connect HDMI cable.
2.
After connection, press the
GREEN
3.
Press the
/ SOURCE button to select HDMI 1 or HDMI 2 and the video from the
connected device will be shown on projector screen.
4.
Press the
button to turn off unit power.
Important Note:
If there is no sound from the internal speakers when playing media contents
from a set top box, BD/DVD or streaming players connecting to the HDMI
input, please check the set top box or the player's digital audio settings and
make sure it is set to "PCM Stereo" mode.
Connect AV
Show The Image On Projector Screen
Follow below picture to connect AV cable and device.
1.
Turn off the unit before connect AV cable.
2.
Use AV cable to connect follow below figure
3.
After connect, press the
GREEN
4.
Press the
/ SOURCE button to select AV mode and the video of AV device will
show on projector screen
5.
Press
button
turn off
power
button to turn on unit and power indicator will light
button to turn on unit and power indicator will light
11
the
to
unit
Advertisement
Table of Contents
