Table of Contents
Advertisement
XGA
NOTE: In order to get the sound from the unit, please connect AV IN
cable when you connect VGA input.
Connect Audio Output
Follow below picture to connect audio cable and device.
1.
Press the
button to turn off power of your projector before connection.
2.
Use audio cable to connect follow below figure.
3.
After connect and turn on both units. Your projector sound from external device now.
4.
After using , turn off both unit
Important Note:
If there is no sound from the stereo audio output when playing media contents from a set
top box, BD/DVD or streaming players connecting to the HDMI input, please check the
set top box or the player's digital audio settings and make sure it is set to "PCM Stereo"
mode.
Install USB Device And Micro SD Card "TF"
Follow below picture to
Turn off the unit before
46.9
40.3
1024x768
48.4
56.5
( Aux Out / Line Out / Earphones)
13
75
50
60
70
install USB and TF card
install USB / TF card.
Advertisement
Table of Contents
