Weather Channels - Icom IC-M90 Instruction Manual

4
BASIC OPERATION
D U.S.A., International and Canadian channels
The IC-M90 has 57 U.S.A., 57 International and 61 Canadian
channels. You must select the proper channels for the oper-
ating area.
q Push [CH/WX•
U/I/C/L
• If the weather channel appears, push [CH/WX•
w Push [Y]/[Z] to select a channel.
• "DUP" appears for duplex channels.
e To change the channel group, push [CH/WX•
sec.
• U.S.A., International and Canadian channels can be selected in
sequence. Depending on the setting, LAND channel can be se-
lected. See the "LAND CHANNEL OPERATION" on p. 15 for de-
tails.
Push for 1 sec.
International channels
8
] to select the regular channel.
U/I/C/L
U/I/C/L
U.S.A. channels
Canadian channels
D Weather channels
The IC-M90 has 10 weather channels. They are used for
monitoring NOAA (National Oceanographic and Atmospheric
Administration) broadcasts (reception of weather channels
possible in U.S.A. only).
] again.
q Push [CH/WX•
w Push [Y]/[Z] to select a weather channel.
e Push [CH/WX•
] for 1
lecting the weather channel group.
Push
✔ CONVENIENT!
The IC-M90 can detect a weather alert tone on the
selected weather channel while in another channel (when the
power save function is turned ON) or during scanning. See
the "SET mode items" on p. 17 for details.
] to select the weather channel group.
U/I/C/L
] to return to the condition before se-
U/I/C/L