Philips BT405/13 Manual page 12

12
English
Cleaning
1 Pull the beard trimming comb straight off the
appliance.
2 Switch on the appliance.
3 Make well-controlled movements. Touch the
hair lightly with the trimmer.
Regular cleaning guarantees better grooming
results.
Never clean, remove or replace a shaving or
cutting unit while the appliance is switched on.
Never wipe cutting units or shaving foils with a
towel or tissue, as this may cause damage.
Never use compressed air, scouring pads,
abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the
appliance.
Clean the appliance after every use. Only the
cutting unit can be rinsed under the tap.
1 Switch off the appliance and disconnect it from
the wall socket.
2 Wipe the housing of the appliance with a dry
cloth.
Never immerse the appliance in water, or rinse
it under the tap.