Table of Contents
Advertisement
1
Custom panel
Recessed
pre-finished
panel
2
3
INSTALL CUSTOM TOE KICK
Align the custom panel to the recessed
pre-finished panel, referring to 'Custom
panel dimensions' for guidance.
Mark a section of the recessed panel to
be removed, ensuring it is shorter than
the custom panel.
On a protected surface, carefully score
the toe kick at the marked height.
Snap off excess toe kick material and
both end tabs.
Smooth the edges.
4
Custom panel
Template
5
Re-align the custom panel to the
recessed panel and secure using the
provided screws.
Pre-drilling the screw bosses is
recommended for optimal results.
Slide toe kick onto the mounting rails
and secure.
Do not over tighten the screws.
17
Advertisement
Table of Contents
