Table of Contents
Advertisement
1
2
5mm
3
10
PROUD INSTALLATION
Turn the cooktop upside down
on a protective cover.
Apply adhesive foam seal around
the glass overhang, 5mm from
the edge of the glass.
Ensure the adhesive side facing is
down to form a continuous seal
around the cooktop.
Trim the excess sealing material
using a sharp cutter or trimmer
knife.
Take care not to damage the
benchtop.
4
5
b
6
Slot the supplied metal adapter
to the rear of the cooktop.
Attach the four side clips to the
cooktop chassis.
Ensure the clips are oriented
correctly.
A
Align any ducting to the outlet
on the cooktop before lowering it
into the cutout.
Tape ducting to secure.
Advertisement
Table of Contents
