Citizen CBM-720 User Manual page 21

1) Remove the paper cover.
2) Put the end of the paper off at a right angle as shown in figure 14.
3) Put the end of the paper into the paper entrance of the printer. (Refer to figure 17.)
4) After turning the power switch on and confirming that the printer is in deselect (off line) status, press the LF
switch to feed the paper into the printer.
5) In the case of the CBM-730, set the imprint face of the paper downward and put it into the paper entrance (If
using 3.0" width paper, place the paper between 2 bars).
If necessary to adjust the sprocket-wheels' position, free them by the lever and slide to the appropriate position,
and lock it back. (Refer to figure 15.)
CBM-710/720/730/750 User's Manual
15 CITIZEN