Citizen CBM-720 User Manual page 17

(1) Power Cord
(2) Inlet
(3 ) Power Switch
(4) Line Switch
(5) LF Switch
(6) Power Lamp
(7) On Line Lamp
(8) Alarm Lamp
(9) Interface Connector
(l0) Connector Cover
(l1) Paper Cover
(l2) Ribbon Cover
(l3) Top Case
(l4) Bottom Plate
(l5) Printer Cover
(l6) Paper-Feed Knob
(l7) Bottom Base
(l8) Base Stoppers
Attach the connector end to the printer inlet, and insert the plug end into an electric
outlet.
This is the electric power inlet. Attach the connector end of the power cord here.
Power is supplied to the printer by turning this switch on.
When this switch is pressed, the printer enters select (on line) status. When pressed
again, the printer enters deselect (off line) status. This switch is also used when
clearing an alarm condition.
Paper feeding is performed when this switch is pressed (in deselect status only).
This is used when inserting the paper and for spacing up etc.
This lights up when the power switch is "on" and goes out when turned "off".
This lights up when the printer is in select (on line) status, and goes out when in
deselect (off line) status. Printing operation is performed only when this lamp is on.
This lights up when printer operation is abnormal. When in an alarm condition,
printing and line feed operations are not performed.
Connects through a cable to a computer etc. Please be certain that power to both
the printer and the computer are turned off when connection is made.
Covers the connector which is used for the paper winder mechanism (AW-2).
Opens when replacing the paper roll.
Opens when replacing the ribbon.
CBM-710/720/730/750 User's Manual
11 CITIZEN