Main Features And Functions - Athena Evolution GET MD60LOG User Manual

2 MAIN FEATURES AND FUNCTIONS

•
IP65 protection grade anti-shock plastic casing
•
Lap time visualisation (average error +/- 1 tenth of a second)
•
Sector time visualisation in relative mode for the single sector or absolute
•
LED notification of the best lap or sector time
•
Memorisation of the best sector times
•
Visualisation of the speed in kilometres per hour or miles per hour (user setting options)
•
Visualisation of the number of laps during a test run
•
Visualisation of the current track in a settable field
•
Visualisation of the best lap time obtained in a settable field
•
Visualisation of the date and time with automatic GPS updating
•
Visualisation of the number of satellites detected by the system
•
Visualisation of the battery level
•
Visual LED low battery level signal alarm
•
Automatic GPS search for the track (if automatic track search is activated)
•
Possibility of creating and memorising any type of track
•
Automatic memorisation of the test run session, archived by date and time
•
Recording of sessions carried out for later PC data analysis
•
Lap times report
•
Intermediate times report (Maximum 4)
•
Maximum speed report
•
Automatic vehicle speed acquisition start up (only with display on)
•
Settable acquisition threshold for start up
•
Settable chronometric measurement display times
•
USB port for PC connection
•
Operational autonomy 6 hours continuous use with new batteries of the type recommended (ref.
Chapter 1 in this document)
GET by Athena Evolution reserves the right to implement new functions over time.
All of the information relative to this and other GET products by Athena Evolution are available on the
internet site: www.getdata.it
4
MD60LOG User Manual rev. 05
Copyright ©2010 GET by Athena Evolution srl. All rights reserved